using routerboard sxt + tp-link router

RouterOS Wireless Networking
1

hi my friends…happy new year for all…
any one have an idea how to set up the routerboard sxt so it give internet to the tp-link router and the tp-link can give the internet service to more than 2 labtops wireleslly..
lets give you more details..
the routerboard sxt connected with my access point (omini5ghz+groove) and the sxt connected with tp-link router
the mode of anennna (sxt ) is = station pseudobridge clone
the tp-link router uses pppoe server

is there a way i can set up the sxt so it recieves internet service from my access point and give it to the tp-link ..

by the way ..if i connect the sxt dircetly to the labtop .i will able to use internet ( using pppoe connection type
)
if i connect the sxt to the tp-link ( of course with wan port on it ) ..i will not be able use internet inspit i set up the settings of tp-link
correctlly
any one have an idea ..what is the wrong?

2

hi
it is very simple.
you must connect your sxt in bridge mode to the your access point.
now you must config your tp-link(WAN) in pppoe mode and set your user name and password of pppoe connection in tp-link.
now you must config your lan,set ip address and nat your lan with your WAN.
now you can config your WLAN for connect your laptop to tp-link.
after this,you able connect to internet from pppoe client in tp-link from your sxt bridge.
good luck.

3

you mean i have to choose the bridge mode of the following choices?

4

Dear,

Yes set the mode for SXT bridge and make bridge in SXT , add bridge and add port ( ether+ wlan) and give it address . and connected the Ethernet fro sxt to router TP-Link and set the configuration to PPoE .

Please check it and let me for any update , please fell free for ask .