v5.19 released

RouterOS General
1

http://www.mikrotik.com/download

What’s new in 5.19 (2012-Jul-16 10:51):

*) ssh - added /ip ssh regenerate-host-key which will regenerate current host key;
*) dhcpv6 client - fix multiple advertise handling;
*) snmp - fix v3 engineID discovery;
*) fix ticking sound on RB411UAHL;
*) user manager - fixed byte to KiB, MiB and GiB conversion
(digit after decimal point was incorectly calculated);
*) fix routerboard firmware upgrade on RB951-2n;
*) sniffer/torch + simple queues sometimes could crash router;

2

Please update changelog. 5.19 include 2.41 http://wiki.mikrotik.com/wiki/RouterBOOT_changelog

No NV2 changes? We have still problem with disconnect… :frowning:

3

not for all devices. RouterBOOT upgrade is issued per-device, not universally for all.

4

routerboot 2.41 detected on RB450G,
is it related to metarouter that have discussed at another thread about running openwrt ?

5

5.19 uptime routerboard 9h RB433UAH (power 24V 2A) problem not responding routerboard (graf statistic,stop traffic, no winbox,no telnet,no wirelles, ether,no SMB, no graf statistic!) (=random stop v.5.18) >> power off-on = OK functional again

6

how about serial console at this moment? please email support@mikrotik.com with your supout.rif file

7

routerboard outside the availability of PC ..(no graf all statistic)…autosupout.rif date 04.7.2012 ?

8

Apparently wrong autosupout.rif file. Make a new one, with “/system sup-out” command

9

ROS 5.18
ROS 5.19
RB433UAH - Reboots.
Sent 5-7 supout.rif - without any response.
Ticket#2012071766000542

10

http://download.mikrotik.com/routeros-mipsbe-5.18.npk

cannot download…

please check…

11

Works fine for me, alternatively there’s a number of MikroTik users who keep historical versions available; one such repository is available here:

http://www.butchevans.com/MT_Software/5.x/

12

No change to rb751U-2Hn 100% flash utilization:

http://forum.mikrotik.com/viewtopic.php?f=3&t=58926&start=50

Ticket #2012062266000481

13

we will get a solution for this problem ?
http://forum.mikrotik.com/t/rb-493g-ethernet-lockups/51499/23

14

No fix for strange working of RB-s with SAMSUNG K9F NAND Flash.

15

Or how about a fix for this Mikrotik DNS caching issue:

http://forum.mikrotik.com/t/mikrotik-dns-server-issues-with-amazon-s3-low-ttl-60sec/53196/1

16

RB450G V5.18 upgrade to V5.19

ip > firewall > NAT table all information is missing.

17

this was fixed in previous version already:
*) fix bad block count not to increase on Samsung K9F1208U0C nand;

ip > firewall > NAT table all information is missing.

cannot reproduce. anyone else seeing this?

Sent 5-7 supout.rif - without any response.
Ticket#2012071766000542

I checked and support has actually responded.

18

WebFig skin bug (direct URL access to disabled sub-menu pages) [Ticket#2012061366000346] still exists :frowning:

Regards,

19

Same board same problem!
I upgraded to 5.19, then i upgrade firmware to 2.41, after 8/10h of works board is down.
Power off-on don’t works.

Now we are taking it down from telco tower and then we chek it bettere.

I really hope is’nt a problem of 5.19 and/or 2.41 firmware, cause i have a lot of board upgraded with it

20

RB450G, 5.19 , 2.41

/system resource> print
uptime: 10h33m20s
version: 5.19
free-memory: 243464KiB
total-memory: 257108KiB
cpu: MIPS 24Kc V7.4
cpu-count: 1
cpu-frequency: 680MHz
cpu-load: 7%
free-hdd-space: 482940KiB
total-hdd-space: 520192KiB
write-sect-since-reboot: 9431
write-sect-total: 207288
bad-blocks: 0.1%
architecture-name: mipsbe
board-name: RB450G
platform: MikroTik


Seems OK, after 10 hours .. traffic only 4Mbps.