What’s new in 6.0 (2013-May-17 14:04): *) ipsec - added /peer passive option which will prevent starting ISAKMP negotiation and signifies xauth responder/initiator side; *) RouterBOARD - default wireless config now includes password - serial number; *) lte - support YOTA WLTUBA-107; *) console…

PietRetief, both firmwares are working ok. We will update to the newer firmware for those boards in next RouterOS release.

what packages are missing? when you upgrade, you must upload the packages you need, if you didn’t upload them, they will not be installed.

@uldis , thank you :slight_smile: So far so good, wireless links and OSPF are behaving well.

My Simple queues stopped limiting the upload side on all the boards I upgraded to 6.0, Download limit works fine.?

post your queue config. how did you check that they are not limiting? which version did you have before upgrade?

what packages are missing? when you upgrade, you must upload the packages you need, if you didn’t upload them, they will not be installed. Lets follow this issue in this topic http://forum.mikrotik.com/t/ros-6-0rc14-update-to-6-0-on-rb-450g-failed/66369/1

They were all between 5.18-5.25. All are either 433ah boards or 435G. MY x86 system running ros v.6rc11 also works fine. Its only the 5 or 6 boards I upgraded last night to 6.0 that does this. Check the file attachment, its not showing any upload traffic. all 0 [test.jpg]

Nevermind i’ve found the problem, its the “everyone” queue at the bottom, when i disable that the uplaod traffic starts running, was just a nice way to check the traffic going out of the board :confused:

Address List is not working on CCR chain=forward action=drop dst-address=10.10.10.10 src-address-list=!ORION in-interface=sfp1 uptime: 17h28m7s version: 6.0 build-time: May/17/2013 14:04:20 free-memory: 3642.6MiB total-memory: 3969.0MiB cpu: tilegx cpu-count: 36 cpu-frequency: 1200MHz cpu-load: 0…

To Chrisdewit: My guess is you have queue Nr:29 (named “everyone”) as parent to all other simple queues. Am I correct? To fix your queues change target from 0.0.0.0/0 to 10.5.1.0/24 or specify target as interface name where clients are connected, everything should work normally Now, lets think…

v6.0 released

RouterOS General

Arnold2222 May 21, 2013, 7:29am 11

Lets follow this issue in this topic
http://forum.mikrotik.com/t/ros-6-0rc14-update-to-6-0-on-rb-450g-failed/66369/1