105547111 - MTU and L2MTU issues are already fixed in 6.36rc
Beone - We will look into this
CyberTod,andriys - Just noticed and reported to developers that g/n is missing from Winbox drop list. You can set it through CLI and it will work
eworm,pe1chl - Export for switch configuration is fixed in 6.36rc
folkert - Do you have MRRU on PPPoE. Try to reduce it so it would be lower than L2MTU on ethernet
freemannnn - Bucket is well explained here - http://wiki.mikrotik.com/wiki/Manual:HTBv6
hatred,napismizpravu - Please report to support@mikrotik.com with detailed explanation of problem, if you experience it again. If router has serial port, then we would want to see what you see there during these reboots
hohwin3a - If installation still reboots your x86 constantly, then please report to support@mikrotik.com. If you see some error output, then make picture or video with it and attach to message to support
lgkahn - Yes, it is mentioned in changelog that latest Winbox is required. If it says that RoMON is disabled, then if you are admin, then connect to router through Winbox, enable RoMON policy and then connect through RoMON
marekm - Wireless-rep needs to be installed manually. You can still use -cm2
McTedson - When you think that NAT is working have you tried to clear connections list and check again?
nuru, dialsc,rommo911,mitzone,qbek - Please report to support@mikrotik.com with detailed explanation and supout files from problematic version
PtDragon,tgrand,RomanHujer - Please try 6.36rc version
Sergey371 - Do router work and Winbox is only problem?
TecnoNet - If API changes dynamic queue speed limit then it is and will not be possible. You have to use static queues or CoA
VirusDr - this issue is already reported to developers. We will try to fix it as soon as possible
WirelessRudy - Yes, normally upgrade works like that, but these specific version had a bug which required router to be rebooted first (6.35rc29-rc49)