v6.46 [stable] is released!

Announcements
21

The cpu temperature (.1.3.6.1.4.1.14988.1.1.3.11.0) for CRS326-24G-2S+ stopped working with “object not found”.

22

Updated 3xHap AC 6.45.7 → 6.46 - so far without issues
Updated 3xHap AC Lite 6.45.7 → 6.46 - no issues

Thanks!

23

Please, contact MikroTik support with attached support output file and example of failing SNMP.

It seems to work for me,
snmpwalk -v1 -c public2 10.155.0.99 1.3.6.1.2.1.4.24.4.1.2.10
IP-MIB::ip.24.4.1.2.10.155.0.0.255.255.255.0.0.10.155.0.99 = IpAddress: 255.255.255.0
IP-MIB::ip.24.4.1.2.10.155.99.0.255.255.255.0.0.10.155.99.1 = IpAddress: 255.255.255.0

24

I Get “Limited Access” on Android App Since The Update to 6.46

25

For me no improvement at all. Still on mobile devices connected to cAP ac or hAP ac2 at 5 GHz download during speedtest peaks to more than 100 Mbit/s, then rapidly slows down. Speedtest in average shows less than 60 Mbit/s for download and more than 150 Mbit for upload. During download test CCQ falls to less than 20%. During upload CCQ is larger than 90%. The same happens in two different locations. There are no other networks at 5 GHz spectrum so noise is not the problem. How long it will take Mikrotik to fix this? Two years like it took with 802.11n and Broadcom clients? Once again regret not buying AP from other vendor.

26

RB3011UiAS-RM
usb hub + 2 usb modem = 1 usb port
Now trying to put both modems on the same port. As a result, only one modem is available.
After the firmware downgrade, everything is fine.

27

We all would like to know… It would be great to have MikroTik router (with very good ROS features) and great working WiFi on it. MikroTik team - please improve wireless at ROS.

28

Updated my home Hap AC2 from long term 6.44.6 to 6.46 stable and ios devices keeps reassociating constantly on 5GHz and 2GHz Wifi. downgraded back to long term - 6.44.6 and WiFi again works great.

29

Thanks for sharing this, we will try to fix it in next RouterOS version.

30

???

31

i have a lot of RB450/RB450G (very old ones, i know), RB2011, RB3011 and some few RB750 Gr3. Update was smooth on all of them, and the only problem i noted is that skin completly stopped working on the RB750 Gr3 devices. I can’t even save a new skin, for example, is gets back to auth page and never works (nor gives any useful error).

In short, skin support completly stopped working on RB750 Gr3 units, was working fine until 6.45.7

32

maybe the same file/folder permssion issue we see with the dude files.

33

hAP lite: after upgrade from 6.45.1 to 6.46 webproxy doesn’t work :frowning:

34

Makes sense ... in that case, of all models i use and updated, RB750Gr3 is the only one that has the "flash/" partition, on the others everything is located on /. Maybe something permission issue related to the "flash/" folder/filesystem, if that's the case. Those who have skin files on /skins/filename.json, are not affected at all.

35

Big issue!
After the upgrade hap ac2 (RouterBOARD D52G-5HacD2HnD-TC) - stopped working any wi-fi (2 and 5 GHz)!
After downgrade to 6.45.7 - wi-fi work fine.

36

Quick Fix for the Dude:

  • stop dude server
  • copy entire /dude/files folder from 6.45.7 installation to your computer
  • rename files folder in 6.46 to something else
  • copy the files folder from your computer back to your 6.46 installation (/dude/)
  • start dude server
    I used Filezilla for this, everything is back to normal
37

*) ccr - improved general system stability;
Could anyone explain what does it improve? Is it addressing an issue with high CPU spikes on CCR at high speeds?

38

Ugraded Groove 52ac from 6.45.7 to v6.46 . Skins no longer works. The .json file appears to be ignored.

If I attempt to use “Design Skin” to build a new skins file the program makes the changes but when I attempt to save the new skin I am dumped back out to the login page with an error message saying that the login name or login password is incorrect.

When I downgrade back to v6.45.7 my skins files work.

39

No issues at all for me, upgraded two hAP AC2 fine, one has a lot of configurations as well (ipsec, qos, etc..).

40

I see similar behaviour on hAP ac2. In my case CCQ during upload goes beyond 100%.