RouterOS version 7.20.6 have been released in the "v7 stable" channel! Before an upgrade: Remember to make backup/export files before an upgrade and save them on another storage device; Make sure the device will not lose power during upgrade process; Device has enough free storage space for all R…

I don’t know your exact scenario, but I use BGP to send routes over several types of tunnel (but not OpenVPN). Of course that is easy when your client is also RouterOS, or Linux, and more difficult when it is just a desktop OS.

it is external routes (cloudfare, DO, amazon, e.t.c) blocked by national internet regulator. They are more 1000, but minimal need for use about 100. If this method didn't work on all platforms, we would use an alternative method, but it work anywhere (win, lin, apple) and mikrotik before 7.20.4

In RouterOS push routes are limited to 1400 chars, which is about 120 routes. This seems to be working just fine on a capable device. If you exceed that amount, the log will show: ovpn,error warning - received OVPN option length exceeds limit Send us supout rif file from your device.

I had a wAP-LTE kit (with R11e-LTE, fw MikroTik_CP_2.160.000_v021) on 7.15.13. nothing fancy, no gymnastics, nothing - as simple as it gets LTE connection to internet and masquerade. i upgraded it to 7.20.6 and lost connectivity to it. had to go on site to see the modem saying “Radio off” and nothin…

NAT or some flow tracking mechanism is broken in 7.20.6 CCR2216-1G-12XS-2XQ I have dst nat to server. Server gets traffic and responds, this is UDP traffic to a PBX gateway. I see traffic hit the server, the server responds, but the router doesn’t ever see it. ran packet sniffer on the interfac…

I can’t confirm what you are observing… usually when you dstnat to a server, you need a srcnat for that server as well. Do you have that and does it count packets?

yes I have a srcnat that MASQ the server subnet to the WAN interface. and no it’s not incrementing.

Try disabling the relevant “service port” in the firewall (those are the NAT helpers that aren’t always helpful)

I try to source from the server out through the SRCNAT/MASQ and it doesn’t work. So there is something more broken than I thought.

Well, that is basic functionality that works for everyone. Probably a configuration error. Time to start a new topic with /export of the config.

V7.20.6 [stable] is released!

Announcements

EdPa January 8, 2026, 2:21pm 86

Long Term version 7.20.7 has been released: