@strods please check SUP-100937, SUP-100938 another two dns-forward issue on 7.7rc1 with forward-to=ip
Hmm, wondering why I have not seen the issue with global variables disappearing… 
I do a lot of scripting, also on mipsbe devices.
Just try yourself… 
What is the LAN_SDS mode on the GPON SFP?
Upgraded maplite from 7.6 to 7.7rc1.
Bootloop.
Netinstalled 7.7rc1, all is well now.
I did. As said... Can not reproduce.
Does this happen from Winbox only? Working via ssh here...
Running the script (no matter if on terminal or on winbox) the run script count increase by 1 and /system script environment report the right value.
But after some minutes and after terminal or winbox is closed, the run script count return to 0 and the environment is cleaned.
I hope you believe me, I’m not the only user notice that and also because I indicated exactly the hardware used and how the device is configured…
@rextended
Is this only on 7.7rc(beta)?
Tested on RB951 7.6 that do have some config. Not able to reproduce error.
No, also tried on 7.4 and 7.6, but the device is always installed from 0 by netinstall.
Tomorrow I try to find one RB951 to test it,
but the bug appears both on RB911G-5HPnD and on RB922UAGS-5HPacD with RouterOS 7.7rc1 and RouterBOOT 7.7rc1 with WinBox 3.37 64 bit
(powered by PoE 24V from a CRS112-8P-4S-IN), do not appear on RB5009 (arm64).
This issue brings in problem in starting containers. All I need are to re create and do some minor configurations
It seems the previous issues in beta 8 and 9 of restarting CAPs have been resolved. CAPsMAN and wireless now are stable
Currently I have done the test on a hAP ac3 (arm) and the same thing happens, the global variables disappear from the environment after a few minutes of closing the winbox.
gosh, please make it more modularized like v6.
7.7rc1 lost Dynamic Servers from pppoe-client, when pppoe-client up 1 hours. maybe dns crash. please check SUP-100985
the 7,7rc1 in our case (more then 5M routes) freezes when modify a filter rule.
opened ticket [SUP-100981]
very dangerous case because the router desn’t reboot just freeze and need a powercycle.
Spero che non era in produzione…
[I hope it wasn’t in production…]
it was 
on the lab the issue didn't arise......
Firewall filter? or route filters?
route filter rule, sorry
Thanks, we repeated the issue