What about EIGRP at Mikrotik

[aanahin]

Can we configure EIGRP on Mikrotik Cloud Core Routers?

If can, How so?

Please help

[lambert]

The protocol is not supported on RouterOS. You will want to use RIP, OSPF, or iBGP.

[ZeroByte]

EIGRP is Cisco-proprietary, so I wouldn’t expect to see it supported in any other vendors.
We recently switched to pure OSPF at my job for just that reason.

[StubArea51]

EIGRP was a Cisco proprietary IGP until 2013, it was then released as an open standard.

References:
https://tools.ietf.org/html/draft-savage-eigrp-00
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enhanced-interior-gateway-routing-protocol-eigrp/qa_C67-726299.html

I wouldn’t mind seeing it in RouterOS one day, to round out the collection of protocols, but there are so many demands on the MikroTik development team, I imagine it will be a while.

[barkas]

Isis should come first.

[nz_monkey]

@barkas

Isis should come first.

+1

[ZeroByte]

@barkas

Isis should come first.

+1

[aanahin]

I know that EIGRP is an open protocol today, that’s why I’ve asked about it in MikroTik Platform. I Hope it will be available soon

@IPANetEngineer

EIGRP was a Cisco proprietary IGP until 2013, it was then released as an open standard.

References:
https://tools.ietf.org/html/draft-savage-eigrp-00
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enhanced-interior-gateway-routing-protocol-eigrp/qa_C67-726299.html

I wouldn’t mind seeing it in RouterOS one day, to round out the collection of protocols, but there are so many demands on the MikroTik development team, I imagine it will be a while.