I have a router with several policies and templates defined. I’m trying to edit them - but while most of the entries work without issue as soon as I try to edit one of the affected lines Winbox instantly closes. I can edit these lines via ssh or webfig - but the fact that Winbox crashes tells me something’s probably wrong with these definitions?
The problem lines are the four non-template entries. I have obfuscated the public IP’s.
aug/04/2020 21:40:37 by RouterOS 6.47.1
software id = 6MPE-115F
model = RB760iGS
serial number = AE370C16F692
/ip ipsec policy group
add name=ModP1k+AES-256-GCM
add name=ModP2k+AES-256-GCM
/ip ipsec policy
add disabled=yes dst-address=10.21.3.4/32 level=unique peer=BlackDragon proposal=ModP2k+AES-256-GCM sa-dst-address=
70.1.1.1 sa-src-address=148.1.1.1 src-address=192.168.0.0/24 tunnel=yes
add disabled=yes dst-address=10.21.3.4/32 level=unique peer=BlackDragon proposal=ModP2k+AES-256-GCM sa-dst-address=
70.1.1.1 sa-src-address=148.1.1.1 src-address=10.21.3.0/24 tunnel=yes
add disabled=yes dst-address=10.21.3.4/32 level=unique peer=BlackDragon proposal=ModP2k+AES-256-GCM sa-dst-address=
70.1.1.1 sa-src-address=148.1.1.1 src-address=10.59.97.0/24 tunnel=yes
add comment=ModP2k+AES-256-GCM dst-address=0.0.0.0/0 group=ModP2k+AES-256-GCM proposal=ModP2k+AES-256-GCM src-address=
0.0.0.0/0 template=yes
add disabled=yes dst-address=10.21.3.7/32 level=unique peer=Note8 proposal=ModP1k+AES-256-GCM sa-dst-address=
172.1.1.1 sa-src-address=148.1.1.1 src-address=10.59.97.0/24 tunnel=yes
add comment=ModP1k+AES-256-GCM dst-address=0.0.0.0/0 group=ModP1k+AES-256-GCM proposal=ModP1k+AES-256-GCM src-address=
0.0.0.0/0 template=yes
add comment=maybe dst-address=0.0.0.0/0 proposal=maybe src-address=0.0.0.0/0 template=yes
set 7 disabled=yes