*) added Close All Windows to Session menu;
*) added New Session command to reset all session info;
*) move Exit command to Session menu and make it exit winbox;
*) added Disconnect command under Session menu that returns to connect window;
*) fixed problem where firewall rule numbers went out of sync when somebody else was moving them around;
*) support new Romon policy (introduced in RouterOS v6.35).
If you experience version related issues, then please report them to support@mikrotik.com.
If you try to upgrade directly from Winbox loader and version is not available, then you might need to wait for a while until cache in path between your device and our servers is refreshed.
Ok, where can I send the flowers! Big bonus for these last adjustments. Good job!
Can I now ask for another adjustment that has been irritating me for years (this is actually something I asked for many years, so versions, ago. Never honored.)
Many options have pull down menu’s.
Now some of these pull down menus are just to set what info is displayed, or not.
But for each field you add, or delete you have to select the option of choice and the pull down menu closes in enforcing your new field (or removal).
If you want a second option set, or removed, you have to do the same sequence again…
Now, with the ever more and more options we are getting, some pull down menu run seemingly forever..
Usually you want to remove, or add, more than one. So this mean you have to select each option in a separate action to make it available or go and after the pull down menu closes, you have to open it again to go to the next option of desire… what a lot of mouse clicks this needs, pfffff…
Why not make ‘tick’ boxes in front of each option that simple can be ticked on, or off, to select, or unselect a version of desire and than one “OK” or “apply” button, or just an ‘enter’ keystroke to implement all of your settings at once?
For instance:
In a wireless device, in the Wireless Tables, tab ‘registration’ list we have connected devices listed with their default columns:
Radio name, Mac Address, Interface, Uptime, AP, WDS, Last Activity (s), Tx/Rx Signal, Tx Rate, Rx Rate
That are 10 columns. But 4 (or 5) of them are not in my interest so I disable them. But I always need some others:
Distance (km), RouterOS Version, Tx/Rx CCQ (%), so I have to enable these 3 extra columns.
In total I have to right click in the window to open the pull down menu 7 (or more) times and then to select, or un-select the preferred options, that’s again 7 clicks. 14 click in total and not seldom I hit the next selection so have to undo that move…
I can even give other examples where more columns are needed to change, so the even more mouse clicks needed.
Just tick boxes in front of each option would make life soooo much easier. (And maybe start than with only one box ticket by default, the name. After opening user would only have to select the other options to tick and apply and here he is, happy with his setting!
why winbox does not get portable function? i mean all files in same folder of winbox.exe and not windows “%userprofile%\AppData\Roaming\Mikrotik\Winbox” folder
when winbox lost connection to device and you try to reconnect and the device is not accessible yet
you get a red erro msg and when that happens all saved address disappear and if you use master password the button change to set master password
If I disable any IP of IP–> ARP list, then ARP list show (IP with MAC) D, 192.168.1.25, 00:00:00:00:00:00, ether1 why? this problem start from Winbox3.1 version with ROS x86.
*) mipsle - architecture support dropped (last fully supported version 6.32.3);
*) wireless - regular “wireless” package is now retired and replaced by “wireless-fp” and “wireless-cm2”;
*) arp - show incomplete ARP entries;
…
Just a small cosmetic issue:
On the dashboard you can add all items multiple times and they show up multiple times.
If an Item is already active, it should be disabled/grayed out in the menu and not accepted for addition.
docmarius - Thank you. We are aware of it and it is reported to developers.
tetecko - We can not make sure that everything can be done with single click. Why do not jut use “X” to close Winbox?
