Hi!
I have made site-to-site between 2 routers on different wan locations. both have public IP.
The traffic is being seen on firewall rule from office 1, but no traffic from office 2? Wierd.
I use 0.0.0.0/0 for “allowed IP” from both sites, but I can’t ping och get connections to devices between the lans.(I use VLAN on both sites)
I have made routes to local ip and used the WG adress as gateway.
Is there a problem when using it with vlan?
no problems, 3 sites are connected via wireguard dual stack.
solved 
The problem was the Public key had been changed by itself for some reason?!..edit them back and everything worked like a charm
anav
5
Quick, get rid of your MT device, clearly its possessed by an evil spirit.
anav
6
Be careful if you add any additional remote users to the config as then it will not necessarily work properly!!!
