If i enable wmm-support=enabled, would this interfere with NV2 or NSTREME when i move my AP’s over to these settings?
From what I understand WMM does not work with NV2 as it has it’s own QoS mechanism (NV2-QoS). http://wiki.mikrotik.com/wiki/Manual:Nv2
In answer to “will it interfere” I have a site migrated to NV2 which still has WMM=Yes on the wireless Settings and it seems to be ignored by NV2 so you should be OK.
Thank you! I currently have to make a CPE script that does settings that are compatible with both 802.11, nstreme and NV2
just put the wireless protocol on any will do right?
just use
wireless-protocol = nv2-nstreme-802.11 on all your CPE’s
wmm only works in 802.11 and is ignored in other proprietary protocols
your signature training link doesn’t work
Will wireless-protocol=any on the CPE’s work with NV2, Nstreme or 802.11 AP?
It would dramatically reduce re-association time for the CPE’s.
On our practice…
by default all the CPE is pre-configure on wireless protocol = any