WPA / WPA2 4way handshake timeout error

RouterOS Wireless Networking
1

WPA / WPA2 4way handshake timeout error…

This is what I see no matter how I setup WPA / WPA2…

The client is an Intel 2200BG card.
AP = 532
ROS = 2.9.40
Card = R52H

I have tried:
for key:

10 char: Text on AP and client
HEX on AP and Client
Hex on AP and Text on client
Text on AP and Hex on client

13 char: Text on AP and client
HEX on AP and Client
Hex on AP and Text on client
Text on AP and Hex on client

16 char: Text on AP and client
HEX on AP and Client
Hex on AP and Text on client
Text on AP and Hex on client

TKIP on AP/client.
AES on AP and client.

I have tried all settings for both WPA and WPA2.

(All are personal WPA)..

Any ideas??

2

in wireless you have to set up mode=dynamic and then use PSK-key for WPA/WPA2

3

“Ack Timeout” is at default. (tried indoor and dynamic)
I am using PSK..

NOTE: the AP is only about 10 feet away from the client (for init testing)…

Am I looking at the correct “dynamic” setting ??

4

I have sent a SupOut to support..

Subject WPA/2200BG.


Craig

5

Got it !!

It was a driver issue on the client..

Windows and toshiba updates were not showing any new files, and the driver “supported” WPA/2 but…

I went searching and found a newer version on the driver / manager (PROSet) and Bingo…

It is listed as ver 10.X (the driver will show 9.X, but the PROSet will show 10.X)

I will list exact version data later..

Needless to say, KEEP your software up to date… and dont rely on the vendor to tell you it is out there..

Craig