Gigair
You should enable script’s to monitor the change of eNB/CellID etc. in time to discover what change that your signal is change rapid.
I assume that the change of Band happend and differ band’s have differ signal level and of course speed as result.
I have similar situation using r11e-LTE6 with only 2 band accessible and one is slow with good signal and second fast with low signal and the modem itself one time prefer a and sometimes prefer opposite one. All this in 4G-LTE Cat.6 who give us 2xBand connection.
The primary-band only show signals on LED’s.
I fix this by 2 ways:
- select only band who give me speed with low signal - that way I use modem as Cat.4 device only with one active band
- use Cell-Lock to specific Band/CellID to force exact Band as primary-band and that way my preffered band is used and signals at LED give me the always the same results. Of course the second ca-band is used automatically. In my situation device can stuck in offline and I use own checking and fixing script.
Please check and use this script to monitor of change the LTE parameters: http://forum.mikrotik.com/t/sxt-lte-4g-cat6/134468/1
2- No matter what SIM I use NOR what carrier, it will not do anything other than “Evolved 3G” even though putting the SIM into a phone results in 4G LTE right away.
All but 2 bands are not supported. So I KNOW it should at least be connecting to those bands at 4g LTE. I have yet to find anybody with an answer. How did you solve the issue?
What issue?
Evolved 3G (LTE) or Evolved 3G (LTE CA2) = Next Generation of 3G = Newer then 3G = 4G = LTE
I not understand the question.