IPv6 SLAAC

[DarkNate]

Is it possible for a Mikrotik router to receive a public IPv6 IP with SLAAC?

I use SLAAC with the following settings that may be helpful for you:

/ipv6 dhcp-client
add add-default-route=yes comment="delgate ISP-assigned prefix" interface=\
    ether1 pool-name=ipv6 prefix-hint=::/56 request=address,prefix \
    use-peer-dns=no
/ipv6 nd
set [ find default=yes ] interface=ether1 mtu=1500 ra-lifetime=none \
    reachable-time=5m
/ipv6 nd prefix default
set preferred-lifetime=4h valid-lifetime=4h
/ipv6 settings
set accept-router-advertisements=yes

I use vlans and my ISP gives me a /56 … so if your ISP gives you a /64 you will need to adjust the script above to omit prefix-hint=::/56

Perhaps you could help me out with my IPv6 issue: http://forum.mikrotik.com/t/ipv6-configuration-on-pppoe-interface/140890/1