I work in a production department, we program Teltonika RUT routers to a standardized configuration to be delivered to venues. We currently program each unit individually on 192.168.1.1. I have purchased a hEX S, I want the ability to have 3 Teltonika routers connected directly to the hEX S and i w…

This has been discussed already before. See here for some info / ideas / … [image] Connecting to multiple devices with same IP-address Beginner Basics Hello Im completely new to MikroTik’s and networking in general. I’ve searched the forum, but need something of a clear…

Thank you so much, I am a total novice with this sort of thing. Thanks for pointing me in the right direction!

Holvoetn’s link points you in the right direction, and this thread actually contains a full worked example of what you need: [image] 1:1 NAT / DNAT configuration help Beginner Basics Hello, we are using "CCR2004-16G-2S+” and need to configure 1:1 NAT (bi-directional) fro…

Hi Lurker888, thanks for point me at that! It has been a great help in trying to understand what I’m doing. I do have some questions though to scale it for my usage,I cant seem to connect directly to the Mikrotik through my browser user 88.1, but I’m connected on WinBox. My flow seems right in tha…

And the questions are ?? PS can you PLEASE use export of config and include it between </> quotes ? Much easier for everyone to read.

Sorry, I know I am trying your patience, I am a complete novice at this and believe me I am pulling my hair out over it. # MikroTik Configuration for Teltonika Routers Isolation and Access via 192.168.88.X # Basic Identity /system identity set name="Teltonika-Gateway" # Interface Lists /interface…

More reference threads (complete working example and related links): [image] Port based Routing to 2 identical IP Beginner Basics Hello, I have 2 standalone machines that are identical and use the same IP addresses. They are currently not integrated in any network. I wo…

This application is quite far from something “default” and you’re making several mistakes: The instructions you followed are for a “bare” (unconfigured) device, not one that has the default configuration The firewall is not correctly configured. I suggest turning the “filters” part off until you h…

[image] Mase: # Interface Lists /interface list add name=Teltonika-Ports add name=WAN /interface list member add interface=ether1 list=WAN add interface=ether3 list=Teltonika-Ports add interface=ether4 list=Teltonika-Ports add interface=ether5 list=Teltonika-Ports # IP Configuration /ip addres…

Using a hEX S as a VLAN

RouterOS General

holvoetn June 19, 2025, 10:49am 2

This has been discussed already before.

See here for some info / ideas / …