RouterOS version 7.19 have been released in the "v7 stable" channel! Before an upgrade: Remember to make backup/export files before an upgrade and save them on another storage device; Make sure the device will not lose power during upgrade process; Device has enough free storage space for all Rou…

Gotcha! I’ll try that. That makes a lot of sense for peering on an IXP with many multilateral peers. Funny thing is I had this set with just the AS before jumping from 7.15 to 7.19.6 and it was establishing. Thanks!

[image] vingjfg: Hi there - remote.allowed-as uses a num-list: /routing filter num-list add disabled=no list=stuff range=65531 Hey! This is COOL! Noted!

hi guys, ax3, ROS 7.19.6, standard config, same as used before all the time very slow copy speed from macbook pro over wifi to a local ubuntu SMB share, speed does not go over 4 MB/s, full gigabit via cable connection -> local server is fine. Same config on ax2 giving the same results. Nothing sp…

Any idea with what rate the MacBook is connected? What does an iPerf test give as result? Can you please share /interface wifi export (minus all personal stuff)

Version 7.20 has been released: [image] V7.20 [stable] is released! Announcements RouterOS version 7.20 have been released in the "v7 stable" channel! Before an upgrade: Remember to make backup/export files before an upgrade and save them on another storage device; Make…

We are experiencing a memory leak issue and instability with IPsec site-to-site Phase 2 on our CCR2004-1G-12S+2XS system running RouterOS version 7.19.6. After a system reboot, everything works as expected. However, after some time, traffic stops passing through the tunnel. Additionally, we've not…

I don’t see that issue. Maybe you are affected by an “attack” that is similar to what brought down all MikroTik routers with IPsec exposed a month ago? That was supposed to be fixed in 7.19.6 but as we never saw any details and the attack was one-shot, who knows if that is true?

Interesting that on the same system we have also ~20 ip-ip tunnels over IPSec and they work as expected, no problem at all. Same configuration on RB1100x4 ROS 6.49.x working without problem.

Fortunately ipsec ports are not publicly available, we are using whitelist.

V7.19.6 [stable] is released!

Announcements

EdPa September 30, 2025, 7:14am 909

Version 7.20 has been released: