mazel
May 29, 2023, 11:28am
8
Hi.
Upgraded to 7.9 and all clients cannot connect to wifi.
Downgraded to 7.8 and everything works fine again.
Am I missing something or its a bug in 7.9?
# may/19/2023 22:29:12 by RouterOS 7.9
/interface bridge
add admin-mac=48:A9:8A:7F:5A:21 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] poe-out=off
/interface wifiwave2
set [ find default-name=wifi1 ] channel.band=5ghz-ax .skip-dfs-channels=\
10min-cac .width=20/40/80mhz configuration.mode=ap .ssid=MikroTik-7F5A25 \
security.authentication-types=wpa2-psk,wpa3-psk .disable-pmkid=yes
set [ find default-name=wifi2 ] channel.band=2ghz-ax .skip-dfs-channels=all \
.width=20/40mhz comment="comment1" configuration.country=\
Germany .mode=ap .ssid=mywifi .tx-power=19 disabled=no \
security.authentication-types=wpa2-psk,wpa3-psk .disable-pmkid=yes \
.encryption="" .management-protection=allowed .wps=disable
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/ip pool
add comment=192.168.99.32/27 name=default-dhcp ranges=\
192.168.99.33-192.168.99.62
/ip dhcp-server
add address-pool=default-dhcp interface=bridge lease-time=1d name=defconf
/port
set 0 name=serial0
/queue simple
add max-limit=6M/25M name="Limited clients" target=192.168.99.32/27
/routing table
add disabled=no fib name=vpnz
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wifi1
add bridge=bridge comment=defconf interface=wifi2
/ip firewall connection tracking
set generic-timeout=2m tcp-established-timeout=1h
/ip neighbor discovery-settings
set discover-interface-list=all lldp-med-net-policy-vlan=1
/ip settings
set allow-fast-path=no
/ipv6 settings
set disable-ipv6=yes max-neighbor-entries=15360
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.99.1/26 comment=defconf interface=bridge network=\
192.168.99.0
/ip cloud
set ddns-enabled=yes ddns-update-interval=10m
/ip dhcp-client
add comment=defconf default-route-distance=2 interface=ether1 use-peer-dns=no \
use-peer-ntp=no
/ip dhcp-server network
add address=192.168.99.0/26 comment=defconf dns-server=192.168.99.1 gateway=\
192.168.99.1 netmask=26 ntp-server=192.168.99.1
/ip dns
set allow-remote-requests=yes cache-max-ttl=6m servers=\
1.1.1.1,1.0.0.1
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="!!!! - disabled to log in from WAN defcon\
f: drop all not coming from LAN" disabled=yes in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related hw-offload=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid dst-address=!192.168.19.0/26 log-prefix=\
drop_invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN log=yes log-prefix=\
drop_forward
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface=ether1
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
33434-33534 protocol=udp
add action=accept chain=input comment=\
"defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=input comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=\
!LAN
add action=accept chain=forward comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
add action=drop chain=forward comment=\
"defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=\
500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=forward comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=\
!LAN
/system clock
set time-zone-name=Europe/Berlin
/system identity
set name=APRR
/system note
set note="APRR "
/system ntp client
set enabled=yes
/system ntp server
set enabled=yes manycast=yes use-local-clock=yes
/system ntp client servers
add address=0.de.pool.ntp.org
add address=1.de.pool.ntp.org
add address=2.de.pool.ntp.org
add address=3.de.pool.ntp.org
I had the same behaviour after upgrade from ROS 7.8 to 7.9 (as you can see in my topic http://forum.mikrotik.com/t/wireless-clients-not-connecting-after-upgrade-to-7-9-hap-ax2/166453/1 However, after I managed my configuration to work with ROS 7.9, I experienced issues with signal stability and strength even when all devices remained in same distance from router as for ROS 7.8. I guess that ROS 7.9 have some combination of SW+HW issues with hAP ax2. Now, I am running 7.10beta8 on my ax2 and it seems that this version is the most stable since my first hAP ax2 setup (from 7.6 to 7.9, the 7.10beta8 is the most stable version with good performance). Please, try upgrading to 7.10beta8.