Mesh handover network with no latency time or no packet loss

[Roy]

@tyronzn

Some good points made above,however it’s really a test of which is faster,OSPF calculating routes first or handing over between AP’s.Down here alot of guys have created mesh networks and although it sounds appealing,it just doesnt do well at all(from what i’ve seen).Quite a bit of my business is take over’s from such providers using that method.I’ve just done a test for you on my network and route calculation took 9 seconds to update from one router to the other,which has 4 hops between them.Possibly could make that faster as my OSPF is all on default.

Only way for sure is to get a couple routers and ap’s and do some bench testing

Hi,
Your OSPF performance is lower time to calculate route then 9 second?
Let me know how did you set.

skype: roy.s.j.yeo

And I have below problem also.
http://forum.mikrotik.com/t/mesh-problem/54203/1
http://forum.mikrotik.com/t/802-11n-throughput-problem/54014/1